Juban Crossing is the newest part of Denham Springs, the retail and residential development at the Juban Road exit off I-12 that took shape after 2015, with subdivisions and apartments filling in around it since. The housing is the most tightly built in the parish: new slab construction, sealed envelopes, air handlers in the attic. That’s efficient, and it means a supply line seeping inside a vanity or a window that leaks in a storm has no path to dry. Newer doesn’t mean drier, and the low, flat ground here drains slowly after a hard rain.
We remove mold in Juban Crossing. Call and tell us what you see or smell and what got wet.
The common calls in newer construction are a bathroom with a fan that ends in the attic, which is bathroom mold removal, and a musty smell when the air conditioner starts, which is HVAC and duct mold remediation.
Tell us where it is and what has gotten wet, even if the house is only a few years old. Removal and remediation only — we don’t test.
Musty when the AC runs in Juban Crossing? Call.
Growth in more than one room — a house that took water in 2016 and was closed up fast, a roof that leaked all summer, a place that sat empty with the AC off. One plan, sealed and worked room by room.
Dark streaks on the roof deck, a stained ceiling under it, a bathroom fan blowing into the attic, an air handler sweating on its platform. Cleaned in place with the attic sealed off from the rooms below.
The ceiling above the tub, the wall behind the toilet, the floor of the vanity cabinet. Wet every day, and the removal that holds once the water is under control.
A musty smell that shows up when the air conditioner starts. Growth at the coil, in the plenum, or in wet flex duct — cleaned or replaced so the system stops moving it around the house.
Raised houses and camps along the Amite, Tickfaw, and Lake Maurepas hold damp air under the floor for months. Joists and subfloor cleaned, wet insulation out, and the space set up to dry.
The smell is coming from somewhere. We find the growth behind it and remove it, rather than masking it with a plug-in or a fresh coat of paint.
Work area sealed, air kept under negative pressure, wet drywall and insulation out, framing cleaned and dried before the wall closes. Written report at the end.
A dark patch on drywall or a ceiling gets removed the same careful way as any other color of mold. What changes the job is the water behind it, not the shade.